3 Best Heated Power Washers for Sale in 2025: Hot Water Cleaning

Looking for a heated power washer for sale? Discover the top 3 hot water pressure washers for commercial and industrial cleaning in 2025. Compare models now!

A heated power washer for sale can transform your industrial cleaning results. Hot water pressure washers remove grease, oil, and stubborn contaminants far more effectively than cold water units. This guide reviews the best 2025 models available for purchase.

Why Choose a Heated Pressure Washer?

• Superior Cleaning: Hot water (140-210°F) dissolves grease 20x faster.
• Sanitization: Kills bacteria and mold at 160°F+.
• Time Savings: Reduces cleaning time by up to 50%.
• Chemical Reduction: Needs less detergent than cold washers.

Top 3 Heated Power Washers for Sale (2025)

1. H2015H Hot & Cold Water Pressure Washer (200Bar 2900PSI)

   • Flow rate: 15 L/min
   • Power: 380V/50HZ, 5.5KW

   The H2015H is a cold and hot water high-pressure washer equipped with a GATLING high-pressure pump and a diesel boiler. It features 200 bar pressure and a flow rate of 15 liters per minute, making it suitable for municipal engineering, stubborn stain removal, oil cleaning, and pipeline unblocking in restaurants and hotels. The 90°C hot water is also suitable for disinfection.

2. H1212H Hot & Cold Water Pressure Washer (120Bar 1740PSI)

   • Flow rate: 12 L/min
   • Power: 220V/50HZ, 2.5KW

   The H1212H is a cold and hot water high-pressure washer equipped with a GATLING high-pressure pump and a diesel boiler. It features 120 bar pressure and a flow rate of 12 liters per minute, making it suitable for municipal engineering, stubborn stain removal, oil cleaning, and pipeline unblocking in restaurants and hotels. The 90°C hot water is also suitable for disinfection.

3. H2515H Hot & Cold Water Pressure Washer (25Mpa 3625PSI)

   • Flow rate: 15 L/min
   • Power: 380V/50HZ, 7.5KW

   The H2515H is a cold and hot water high-pressure washer equipped with a GATLING high-pressure pump and a diesel boiler. It features 250 bar pressure and a flow rate of 15 liters per minute, making it suitable for municipal engineering, stubborn stain removal, oil cleaning, and pipeline unblocking in restaurants and hotels. The 90°C hot water is also suitable for disinfection.

Key Buying Considerations

Temperature Range:

• 140-160°F: Light commercial/grease removal
• 180-210°F: Industrial/heavy oil removal

Fuel Type:

• Diesel: Highest temperatures
• Kerosene: Good balance
• Electric: Lowest maintenance

Flow Rate:

• 4-5 GPM ideal for most industrial uses
• Higher GPM = faster cleaning

Maintenance Essentials

1. Daily Care:

• Flush water system after use
• Check burner operation

2. Monthly Maintenance:

• Inspect heating coils
• Test safety valves

3. Winterization:

• Add antifreeze if freezing expected
• Drain all water when storing

Heated vs. Cold Water Washers: Comparison

Application	Heated Washer	Cold Washer
Oil/Grease	★★★★★	★★☆
Sanitization	★★★★★	★☆☆
Winter Use	★★★★★	★☆☆
Initial Cost	★★☆	★★★★★
Operating Cost	★★☆	★★★★★

Where to Buy Heated Power Washers

www.gatlingtech.com

Conclusion

Investing in a quality heated power washer for sale pays dividends in cleaning efficiency. Our top 3 picks offer solutions for every budget and application. Remember to factor in fuel costs and maintenance when choosing your ideal hot water pressure washer.