3 Best Heated Power Washers for Sale in Australia 2025: Hot Water Cleaning
GatlingTechFor superior industrial cleaning, consider a heated power washer - its hot water system eliminates grease, oil and tough stains much better than cold water models. Here are the top 2025 options currently on sale.
1. Why Choose a Heated Pressure Washer?
- Superior Cleaning: Hot water (140-210Β°F) dissolves grease 20x faster.
- Sanitization: Kills bacteria and mold at 160Β°F and above.
- Time Savings: Reduces cleaning time by up to 50%.
- Chemical Reduction: Needs less detergent than cold washers.
2. Top 3 Heated Power Washers for Sale (2025)
| Model | Pressure (PSI) | Flow Rate | Power |
|---|---|---|---|
| Gatling H2515H | 3625 | 15 L/min | 380V/50HZ, 7.5KW |
| Gatling H2015H | 2900 | 15 L/min | 380V/50HZ, 5.5KW |
| Gatling H1212H | 1740 | 12 L/min | 220V/50HZ, 2.5KW |
Data source: www.gatlingtech.com
-
H2515H Hot & Cold Water Pressure Washer (25Mpa 3625PSI)
The H2515H is a cold and hot water high-pressure washer equipped with a GATLING high-pressure pump and a diesel boiler. It features 250 bar pressure and a flow rate of 15 liters per minute, making it suitable for municipal engineering, stubborn stain removal, oil cleaning, and pipeline unblocking in restaurants and hotels. The 90Β°C hot water is also suitable for disinfection.
-
H2015H Hot & Cold Water Pressure Washer (200Bar 2900PSI)
The H2015H is a cold and hot water high-pressure washer equipped with a GATLING high-pressure pump and a diesel boiler. It features 200 bar pressure and a flow rate of 15 liters per minute, making it suitable for municipal engineering, stubborn stain removal, oil cleaning, and pipeline unblocking in restaurants and hotels. The 90Β°C hot water is also suitable for disinfection.
-
H1212H Hot & Cold Water Pressure Washer (120Bar 1740PSI)
The H1212H is a cold and hot water high-pressure washer equipped with a GATLING high-pressure pump and a diesel boiler. It features 120 bar pressure and a flow rate of 12 liters per minute, making it suitable for municipal engineering, stubborn stain removal, oil cleaning, and pipeline unblocking in restaurants and hotels. The 90Β°C hot water is also suitable for disinfection.
3. Key Buying Considerations
Temperature Range
- 140-160Β°F: Light commercial/grease removal
- 180-210Β°F: Industrial/heavy oil removal
Fuel Type
- Diesel: Highest temperatures
- Kerosene: Good balance
- Electric: Lowest maintenance
Flow Rate
- 4-5 GPM ideal for most industrial uses
- Higher GPM = faster cleaning
4. Maintenance Essentials
Daily Care
- Flush water system after use
- Check burner operation
Monthly Maintenance
- Inspect heating coils
- Test safety valves
Winterization
- Add antifreeze if freezing is expected
- Drain all water when storing
5. Heated vs. Cold Water Washers: Comparison
| Application | Heated Washer | Cold Washer |
|---|---|---|
| Oil/Grease | β β β β β | β β βββ |
| Sanitization | β β β β β | β ββββ |
| Winter Use | β β β β β | β ββββ |
| Initial Cost | β β βββ | β β β β β |
| Operating Cost | β β βββ | β β β β β |
Where to Buy Heated Power Washers
Conclusion
Elevate your cleaning standards with a heated power washer designed for industrial use. The thermal cleaning action of hot water models makes short work of persistent oil and grease that cold water systems struggle with. View the highest-rated 2025 models now on the market.